RoadMachinerySparesPaver conveyor wear
When should a Vögele paver conveyor chain be replaced?
A conveyor chain should not be replaced from operating hours alone. Its elongation, link condition and interaction with sprockets and slats determine whether adjustment remains possible. Use the limit and measuring method for the installed Vögele conveyor assembly.
Inspect more than chain tension
After isolation, check several chain sections for stiff links, damaged rollers, loose attachments and uneven wear. Inspect sprocket teeth and slat connections. A chain adjusted to the end of its range may be worn, but a damaged tensioner or buildup can create a similar appearance.
Record before removal
- Paver model, serial range, conveyor side and chain reference
- Measurement location and result from the approved method
- Sprocket and slat condition
- Whether the chain is ordered as a loop, paired set or component assembly
Plan the replacement as a system
If sprockets or attachments are beyond their service limits, address them in the same repair plan. Fit and tension the new chain according to the service procedure, then perform the required initial check. Save the removed chain number for future orders.
Confirm machine-specific limits and procedures with the appropriate service documentation.